MOGAS Severe Service Ball Valves

RSVP (ASME 600–4500 Limited Class)
Through years of field experience, working with major power producers and a sophisticated performance analysis procedure, MOGAS has developed a product line dedicated to absolute isolation of critical equipment, dependable on/off operation for drains and vents, as well as longer valve life for increased run-time.
MOGAS provides its advanced technology to the power industry with the RSVP designed to handle high-temperatures, high pressures, high-cycling, thermal shock and abrasive media.

Gen-X (ASME 600/900/1500 Limited Class)
Full Bore Designed to Meet TDP-1 1998.
Gen-X metal-seated severe service ball valves are built and tested for the prevention of water damage to your steam turbines. The cold reheat drain, hot reheat drain and main steam srain Gen-X valves meet and/or exceed TDP bore and reliability requirements.
Dual metal alloy upstream and downstream seats with chrome carbide HRC 65 hard coating prevent downstream sealing damage from flashing, especially in carbon steel cold reheat lines. The MOGAS Gen-X Power product line is offered for both automated on/off and manual on/off valve applications throughout today’s power plant.

PORV (ASME 1500/2500/4500 Class)
High-Performance Valve Contributes to Plant Safety
The MOGAS PORV, a pneumatic actuated pressure relieving valve, prevents excessive system pressure accumulation. The set pressure of the PORV is lower than that of the spring-loaded safety valve to prevent or reduce the number of lifts of the safety valve, thus extending their life. The PORV is available either non-stamped or with the “V” stamp. The “V” stamped PORV has been flow certified by the National Board of Boiler and Pressure Vessel Inspectors.
The PORV operates as a system. The MOGAS ball valve is normally closed. The pressure switch senses steam pressure and closes an electrical switch when the pressure exceeds a predetermined point. This, in turn, energizes the solenoid valve, which pressurizes the “to open” cylinder port of the pneumatic actuator, opening the ball valve. When the pressure switch senses that the steam pressure has returned to normal, the electrical switch within the pressure switch opens, de-energizing the solenoid valve and closes the MOGAS ball valve.

C-Series (ASME 150–4500 Class)
Dependable Isolation.
The best choice in large bore isolation applications. MOGAS engineers have successfully designed the C-Series valve line which isolates under the extreme conditions – high temperature up to 1652°F (900°C), high pressures up to 43,000 psig (2965 bar g), media build-up, cycling with solids in the line and erosive attack of materials and coatings. With near 40 years of engineering expertise, each C-Series valve is designed specifically for the application.
Each ball and seat subassembly is mate-lapped by hand and put through a rigorous testing procedure to ensure its integrity. The C-Series valve is available in full or reduced bore, ½ inch to 36 inches and in a wide variety of end connections.

SC-3PC (ASME 2500 Class)
Flexibility of In-line Repair.
The SC-3PC has a three-piece body assembly with two proprietary body seals that allow the valve body to be easily removed while the end connections remain in line. The design also allows the valve body to be tested after repair, prior to insertion back in-line.
The SC-3PC is used in power plants for isolation of high pressure / high temperature applications.

MAX Series
MOGAS valve designs can be engineered to unique operational requirements. MOGAS MAX-Series valves involve strong collaboration between your engineering, operations and maintenance staff, along with MOGAS personnel. Site visits, technical discussions and/or specific testing are often required. These customized valves are special, one-of-a-kind solutions to satisfy your specific valve challenges. To learn more, contact a MOGAS representative today.

FlexStream technology
Our ball valves are proven performers for the power, refining and mining industries, and FlexStream technology looks to provide the required capability to control flowstream. The technology is unsurpassed in channeling high pressure differential rates of flow of gases, multi-phase fluids and liquids to combat:

• Velocity
• Cavitation
• Flashing
• Noise

MOMENTUM Services — a division of MOGAS
Momentum Services provides cleanroom services for oxygen cleaning, aqueous cleaning and degreasing, and ultrasonic cleaning services, and emissions and pressure testing for valves, piping, tubing, fittings, gauges and other industrial equipment

PERFORMANCE GUARANTEE
Plus a Lifetime Warranty.
We now offer an unprecedented, application specific PERFORMANCE GUARANTEE on our metal-seated isolation and control valves. Most industrial severe service valve “warranties” are limited to material and workmanship for at least one year — Big deal. We offer a PERFORMANCE GUARANTEE on each valve, plus a Lifetime Warranty on material and workmanship — Big difference.
MOGAS will repair or replace valves at no charge should inspection indicate the valves have had external leakage or did not perform its intended purpose because of internal leakage during the application specific, predetermined time period.

MORE™ Asset Management Plan
Most customers want a total purchase and service plan that allows them to minimize their total cost of ownership, as well as truly benefit from predictive maintenance. Getting more value for every dollar is now more important than ever. MOGAS is pleased to introduce the MORE™ Asset Management Plan. This plan is customizable for each client to meet their specific needs.

• Managed Inventories
• On-site Services
• Order Tracking
• Diagnostics
• Certified Training
• Walkdown Evaluations
• Valve Management Program (VMP) Online